Fender Strat+Warmoth Opt+SRV Pickups+Tequila Sunrise Green+ 22 Fret Custom Neck

  
Fender Guitar + Custom 22 fret. Includes: Option to Add a Warmoth Neck if needed. Modified with-all new hardware, new pickups plus treble bleed circuit and. Custom 22 fret Rosewood/Maple neck.

Fender and Warmoth Necks will fit perfectly also. Building satisfied players one Haywire Custom guitar at a time!

Sustain with lots of resonance. Modified Tequila Sunrise Green Fender Strat.

5 Way Switching includes-3 Single Coil and 2 Humbucking Modes! Total weight- 6.5 lbs. The Neck is a Maple/Rosewood Custom Shop USA Hand Built beauty. It has been fitted, the frets leveled, the neck aligned on all 4 axis, the frets were then crowned and polished for a smooth broken in feel. Comfortable familiar feel, low action with a 1-11/16 nut width and a standard thin back profile. Similar to: Gibson Les Paul. Its Beefy "C" shape will feel comfortable to most players.

This Guitar Neck Fingerboard Radius is 12. The fingerboard, or playing surface of the guitar neck, is usually curved or radiused across its width. The purpose of this radius is to accommodate the natural ergonomic shape of your fingers when they are in playing position. Comfort is certainly a major factor in selecting a fingerboard radius but it is not the only factor.

The fingerboard radius must also allow you to play the style of music you prefer. Includes strings, string trees, nut and full set-up. Variable Treble Bleed Circuit included: This mod keeps the tone you have on "10" throughout the entire range of the volume control. We add a resistor capacitor network to the input and output of the volume control to keep the highs from leaving your tone as the volume is decreased. By adding this circuit we can help you avoid the "muddy-tone" syndrome.

Now your tone is much more controllable and articulate! When the Treble Bleed Circuit is included.

Turning the volume control applies varying amounts of a specially tuned high frequency filter to the selected pickups. On Humbuckers (either North or South or both coils can be filtered). This variable treble bleed circuit is pre-installed. This variable treble bleed/bypass circuit corrects the problem of high frequency losses, provides auto-adjustment of tone at reduced volumes and improves audio taper between 3 and 10.

Check out our other Guitars. Pix, info, custom work, artwork, setup and Design by. This guitar body has a very warm and crisp sound. It is built light and resonant for sustaining notes.

The treble bleed circuit keeps it clear with a good strong signal all the way down. You can add extra bass with the tone controls.

Overall a great choice for many styles and genres. Because of it's very light weight, it is extremely and comfortable to play all night long. Custom Shop Axes-without the Custom Shop Prices! Haywire Guitar Custom Guitars-Home of the "Gig Ready" Guitar! Call or write with any questions you may have call Rick.

Custom Strat with Vintage sound SRV Pickups and.... Professional Setup for a working musician.

Refinished Tequila Sunrise Green Fender body for a lightweight application. NEW : Hardware, New Fender Tuners + SRV Pickups. Three-Ply White Pick guard, New Jack, Strings, Knobs + new electronics. It's slightly used but in perfect shape. This light Custom Stratocaster Body with Vintage SRV Noiseless Pickups is a dream to play all night long. Haywire Custom Guitar instruments feature a number of deluxe electronic configurations, from.

The pick ups are specially made. SRV's over-wound about 10% as follows. For Pick-Ups the ohms are. If you like Stevie Ray's Sound-You'll love these. Vintage Pick ups with vintage style magnets!

Pick ups added give it a Stevie Ray signature sound in any amp! 1952 Ceramic Magnets Were Introduced by. Van Oosterhout from the Phillips Company. They developed the first commercial ceramic magnets based on barium, strontium, and lead-iron oxides.

Ceramic magnets are completely neutral and add no coloration to the tone. They are great magnets for high output applications. Ceramic work great for crunch and distortion. The SRV pickups in this guitar contain ceramic s and are high output pickups that. Deliver all the aggression you need and can be used from blues to jazz to metal. The tone of these pickups is often described as aggressive with. Moderate to high output which can overdrive an amplifier.

Ceramic magnets have lower force on the strings than alnico magnets. Very strong magnets (typically the alnico magnets) exert a. Strong pull on the strings of the instrument and.

Can reduce sustain and pull strings, "out of tune". Pickups added give it a Stevie Ray signature sound in any amp! All hardware, pickups, strap knobs, electronics, switch INCLUDED and installed on body: No Charge. OPTIONAL -Add a NEW Finished Warmoth Neck.

Your specs as well as super wide and fat guitar necks to thin and slim! Choose your neck specs from a super wide and fat guitar neck to thin and slim or anything in between. It's your neck-it's your choice! Right Handed with standard Strat or Telecaster Headstock- your choice! White Corian or Black tusq- your choice!

Standard thin or your choice. 6105 Stainless Steel Frets or your choice. We are experts in the area of Custom Guitar setup, installation, repair, neck fretting, neck refinishing, neck fitting, alignment, and action adjustment and neck design. The electric guitar Floating tremolo or "trem" bridge is only Decked when the screws are tightened under the tremolo cover plate in the back of the guitar body. 2- Lower action can be achieved. If done properly the springs will be so tight that the tremolo will not move thereby rendering it blocked.

The re-sale value is much better if you dont physically change anything that cant be reversed since lots of players still want a trem or whammy bar on their guitars. Fortunately there is another benefit. There is more sustain without the floating tremolo. If its blocked and it stays in perfect tune and its not permanent or invasive to your instrument and its completely reversible-then.

Whats not to like about that? All controls and pots, switches are new with. The SRV pick ups are. They are slightly hotter than stock. They are similar to Fender stock pick ups but wound.

These Pick Ups are RoHS Compliant. It allows you to roll off your volume without losing the highs.

Would you like being able to use the volume control... With a Treble Bleed Circuit Mod.

The pot allows some of the current to go to ground as opposed to the output. Frequencies that leave first are the highs.

Which leave the tone muddy and obscured without an "edge" on it to a discerning ear. When you lower your guitar's Volume control so does your tone's clarity. Your tone is now muddy & with too much bass.

By adding a Haywire Treble Bleed Circuit to your Volume Control Pot, your guitar will "Bleed" in more Treble as you turn your volume down. Now you have much cleaner, articulate tones when rolling down the volume control. It allows the treble frequencies to be re-introduced into the output for.

At Haywire we simply install a TB Circuit capacitor. We build them in our custom guitars for a better Low and High sound spectrum. 1- error-correction of signals with enhanced clarity.

2- preserve high end frequencies. 3-improved taper when rolling back your volume control.

More about this on the Haywire Website. Your Stratocaster is now- More Functional. This is an excellent instrument... If you take your playing seriously then take a great guitar to the gig with you.

This instrument is very sweet and will serve you, the professional player, for many years to come. You practice hard and you work hard on your playing! Get a great tool to work with! No roadblocks to your success as a guitarist! WHAT IS A GUITAR CUSTOM SHOP?

It occurred to us that guitar players really have very little understanding of the scope and purpose of a custom guitar shop. We discovered this quite accidentally by listening closely to some of the questions received over the last few years. For example, one question that still comes up often is, Nice guitar-but how does it play?

That question always puzzles us. Because it is our job as a #Custom Guitar Shop to simply make the #guitar play -how the player wants it to play.

That is as good as it gets but guitar players are so accustomed to traveling from store to store looking for the right instrument rather than just making a decision then turning it over to us to make it right. A custom guitar facility is a smarter way to get what you need because we are the experts. It's not a players responsibility to get the guitar right-it's ours. After we make the necessary adjustments, tweaks, intonation checks, action and electronics changes, neck modifications and proper string adjustments-you have a great playing guitar that plays EXACTLY how you need it to play as a guitarist. Assemblers NOTE: Be ready to make any adjustments necessary to make your project work with any necks and. Adjustments to make your own neck and this body fit together well. It takes skill it's not co-incidence.

If you know what you're doing this is easy. If you don't-then leave this page.

Remember to place your neck in the body you intend to use and drill holes in the neck so they will line up with this body. It may require you to do some work in the form of plugging some neck holes. Some of you know that and we know that. The rest of you roll up your sleeves and don't complain. Most craftsmen realize- every neck may not fit every body as well as every body will not suit every neck.

Sometimes holes will line up and. Sometimes they wont-so again, make sure you drill your OWN holes in your neck and plug any existing ones. Clamp and align prior to drilling neck holes.

If you need to plug some holes then-by all means-do it. We cannot be responsible for. If you're gonna "Do it yourself" then do it.

We are aware that there are some differences between bodies and necks. They are not all identical.

A small space in the neck pocket however will not affect the playability setup, neck installation or action adjustments. Fender often times uses shims in the pockets because of that reason. There should be some space to move the neck right or left when adding a neck so as to get the margins even on the right and left sides of the fret board. There is always craftsmanship involved with building and modifying guitars.

Be ready to make any adjustments necessary to make your project work with any necks and make the necessary adjustments. If you feel that you don't have the skill in working with wood or guitar mods-please don't feel bad, instead-send us your project parts, we can do it, and we'll finish it for you.

See more about our guitars and models on the Haywire Website. Write or call with any questions you may have call Rick. Haywire Custom Guitars 8-point gig ready guitar process.. The 4-axis Alignment of the guitar neck. Each guitar neck is checked and adjusted to insure that it is true and straight to insure proper alignment on all axis.

This step insures proper action and allows for more accurate and easier guitar tuning, playing and set-up in the following steps. Inspect and Lube the guitar tuning gears. Before installing the guitar tuning gears, each one is checked thoroughly. Each tuning gear is adjusted-there is no play in the mechanism. They are then lubricated to insure smooth and even movement to make your guitar tune accurately.

Potting the guitar pickups -We dip the pickups in hot wax to reduce squeal and unwanted guitar feedback. Prep the guitar body -Before installing the guitar electronic components, great care is taken to insure that all wires are properly routed, spaced, and grounded to insure years of trouble free service with your guitar. Level and polish the frets -This insures that all of the guitar frets are level, eliminating any possibility of fret buzz due to unevenness. Radius the guitar strings -Most guitar necks have a contour over the top of the neck.

We adjust the strings to make sure that height of each string follows the contour of the guitar neck. Adjusting the overall guitar string height and the action. Once we set the contour and radius of the guitar strings, then to adjust the overall height of the strings from the top of the frets to the bottom of the strings. Set the guitar intonation -This step is done twice. The intonation is set two times with a 24 hour seat-in period in between to allow the guitar to properly re-seat to the new adjustments. Haywire Custom Guitars is a unique Custom Shop of craftsman where we modify guitars from many manufacturers. We alter instruments to individual or personal specifications and offer the resulting upgraded instruments for sale. We are not a Gibson, Epiphone, Washburn, Wilkinson, Parker, Carvin, BC Rich USA, Jackson, PRS, Ernie Ball, Warmoth or Fender dealer nor are we affiliated with any of these companies. We upgrade electronics, necks, hardware and finishes and offer the finished products for sale.

Fender, Stratocaster, Telecaster and Gibson, Les Paul, Buzz Feiten and related marks are trademarks of Fender Musical Instruments, Gibson, Buzz Feiten respectively and/or their affiliates. All other trademarks or registered trademarks referenced in this site are the property of their respective owners. The guitars we specialize in rebuilding, changing, refurbishing and setting up are instruments with replaceable necks and bodies because we have more requests to add, change and modify these instruments more than any others. We do not build Fender guitars we add value to them in our "8 Point Gig Ready Process" or other modifications requested by our customers from time to time.

We do however, replace and upgrade parts as required. As noted above several examples include: Gibson, PRS, Jackson, Bigsby®, G&L, The Bigsby® mark and Bigsby tailpiece designs are registered trademarks of Fred W. And many other brands as noted above and alter these and re-sell them as refurbished instruments. We change necks from one guitar to another to find the best combination. We do not and will not copy or build knock -off products of other companies.

We do not do anything that would dilute the brand of these manufacturers. Therefore, in the event that occurs, we reserve the right to use a "substitute item". The item we can substitute will be comparable and of like kind, quality and and/or in many cases, greater value. Since we do not manufacture signature brand items we rely on the descriptions provided by our suppliers.

We will not knowing sell the wrong products or parts. The photos on The Haywire Custom Guitars website are taken by us and are all types of guitars that have passed through the Haywire Custom shop at one time or another for service and/or modification as requested by the original owner or as determined to be necessary to bring the instrument up to an extremely comfortable and playable state as well as intoned as necessary. Write with any questions you may have. One of the main functions of a Custom Guitar Shop should be to hit the target the first time by building as close to a perfect instrument as possible!

At Haywire our aim is getting better every day! The job is only complete when you are completely happy with your guitar because you'll use it every day. It needs to be comfortable and light-weight enough to play for hours at a time in any situation without fatigue. The sound has to be clear and tone-great. It has to be built to withstand the rigors of being on the road whether touring or playing in local venues.

It has to feel good to you when you play it. The action and feel need to be consistent all the way down the neck so you won't be forced to alter your playing technique as you travel around on the fret board. A guitar players instrument needs to be in tune on every fret so we pay careful attention to the intonation settings. It has to look good for you and represent your sense of style. The finish has to last for a long time to protect the wood from absorbing moisture from the atmosphere as well as sweat from direct contact with hard working hands.

The neck needs to have a truss rod that is easy to adjust for seasonal variations in temperature as well as the ability to transmit sound and add extra sustain for players. Strings added need to be a comfortable gauge without too much resistance thus making it easier to push down to the crown of the frets. These are just some of the things that we think about every day to make sure we get it exactly right for guitar players who need a great instrument for their passion-PLAYING GUITAR!!

We're building satisfied players..... One Haywire Guitar at a time! The item "Fender Strat+Warmoth Opt+SRV Pickups+Tequila Sunrise Green+ 22 Fret Custom Neck" is in sale since Wednesday, June 28, 2017. This item is in the category "Musical Instruments & Gear\Guitars & Basses\Electric Guitars". The seller is "haywirecustomguitars" and is located in Conway, South Carolina. This item can be shipped worldwide.

• Brand: Fender-Stratocaster+WarmothOpt
• Model: Stratocaster
• MPN: Does Not Apply
• Body Type: Solid
• String Configuration: 6 String
• Dexterity: Right-Handed
• Body Material: Alder
• Country/Region of Manufacture: United States
• Country of Manufacture: USA
• Style: Fender Stratocaster upgrade Plus Warmoth Option
• Series: Standard Strat body
• Type: Haywire Custom Shop modified fender strat upgrade
• Hand: Right Hand neck with Option to Add a Warmoth Neck
• Haywire Custom Guitars: Haywire Custom Shop Guitar Services
• Haywire Stratocaster Customs: https://www.haywirecustomguitars.com
• Model Year: 2014
• Body Color: White
• Features: Treble Bleed Circuit
• Items Included: Custom 22 fret Rosewood/Maple neck and Loaded body
• Haywire Custom Shop Modified: Added Custom 22 fret Rosewood/Maple neck
• Size: Full Size